Wireless HandHeld

1.) Ensure the sound board is on. See “Turn Sound On/Off (Quick Reference)”.

2.) Locate the wireless handheld mic, found to the left of the soundboard.

3.) Remove the battery cover by unscrewing the bottom.

4.) Insert batteries. The batteries are located in between the soundboard and the sound computer monitor. The handheld mic requires two batteries.

5.) Screw the battery cover back on and locate the power button, shown in the picture. Press and hold until the light turns on. If it doesn't turn on, recheck the batteries.

6.) When the mic is on it should look like the picture below.

7.) On the soundboard, locate the wireless handheld channel, channel 13. Adjust to desired volume. Ensure the “mute” is not lit.