Turn Sound On/Off (Quick Reference)

Turn on in the follow order:

1.) Turn the soundboard on first. The switch is on the bottom corner of the sound board.

2.) Turn on the amps, by flipping the wall switch to 'on' (this should already be ‘on’ and should always stay ‘on’) and turning the main power supply on.

3.) Set Volume Fader to the level in the picture below. Set all four blue faders and the right silver fader. Also ensure the above mute buttons are not lit up.

Turn off in the reverse order.

1.) --DO NOT FLIP THE WALL SWITCH TO OFF-- Turn off the main supply under the stage.

2.) Turn off the soundboard.

For Band monitor, see “Band Monitors (Quick Reference)”.