How to Record

1.) Ensure the sound board is on. See “Turn Sound On/Off (Quick Reference)”.

2.) Locate the recording device, to the right of the sound board.

3.) Press and hold the power button until it turns on.

4.) Press the play button to advance to the recording screen.

5.) Press the “Record” button to arm the recording device. There should be a blinking red light now at the top of the device. (Note: The device is not recording yet, it is just armed to record, or in order words, it is now ready to record.)

6.) Press “Record” again to start the recording. This starts the recording and the blinking red light should now be a solid red light.

7.) Press the “Stop” button to stop the recording.

8.) When done recording, press and hold the “Stop” button to turn off the recording device.

9.) To get the recording from the device: Turn the device back on by holding the power button.

10.) Press the “-” button on the bottom to select “Storage” and press the play button to advance.

11.) You should see the following:

12.) On the computer, navigate to the recording device folder. The recordings will be found under “/MUSIC/OLD” and should be the first on the list.